FAN501AMPX
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WQFN Exposed Pad |
| Number of Pins | 10 |
| Weight | 20.3152mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | WSaver® |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Number of Outputs | 1 |
| Output Voltage | 1.5V |
| Operating Supply Voltage | 15V |
| Analog IC - Other Type | BATTERY CHARGE CONTROLLER |
| Operating Supply Current | 3.5mA |
| Voltage - Supply (Vcc/Vdd) | 6V~30V |
| Max Supply Current | 5mA |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 85kHz~140kHz |
| Rise Time | 140ns |
| Fall Time (Typ) | 50 ns |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage |
| Max Duty Cycle | 77 % |
| Isolation | Non-Isolated |
| Duty Cycle | 68.5% |
| Output Isolation | Isolated |
| Voltage - Start Up | 17.5V |
| Height | 750μm |
| Length | 4mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
FAN501AMPX Overview
A ac to dc converter of the package 10-WQFN Exposed Pad contains the ac to dc converter.You can get it in AC/DC power converter Tape & Reel (TR) .In this case, the AC/DC converter is mounted in the way of Surface Mount .To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~125°C TA .A BATTERY CHARGE CONTROLLER analog integrated circuit is used in this AC DC converter.When the switching frequency reaches 85kHz~140kHz , the circuit is closed.Supply voltage (Vcc/Vdd) does not need to exceed 6V~30V .As a result, it has a total of 10 terminations.It contains 10 pins.The ac dc converters are suitable to mount by Surface Mount .A member of the WSaver? manufacturer family, it has the following characteristics.The number of outputs to run is 1 .There are a ac to dc conversions included in Switching Regulator or Controllers .Its output voltage is1.5V .Interfacing ICs conduct when there is 15V supply voltage.AC to DC converter is capable of handling a maximum supply current of 5mA A.
FAN501AMPX Features
Packaged with 10-WQFN Exposed Pad
Switching Frequency at 85kHz~140kHz
With 10 pins
Operating Supply Voltage at the range of 15V
FAN501AMPX Applications
There are a lot of ON Semiconductor FAN501AMPX AC DC Converters applications.
- Humidifier
- Adapters
- Battery chargers for cordless
- Battery chargers for smart phones
- Z-Wave
- WiFi Wireless
- Laptops
- Vacuum Cleaner
- Open Frame Switching Power Supply
- Cleaners