FAN4803CP2_NA3E220
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Supplier Device Package | 8-PDIP |
| Weight | 851mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2004 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 10V~15V |
| Base Part Number | FAN4803 |
| Min Supply Voltage | 11.5V |
| Max Supply Current | 4mA |
| Frequency - Switching | 67kHz |
| Mode | Average Current |
| Current - Startup | 200μA |
| RoHS Status | RoHS Compliant |
FAN4803CP2_NA3E220 Overview
It comes in a 8-DIP (0.300, 7.62mm) package.As you can see, it's packaged in a Tube-shape.Mounting type Through Hole describes the device.In order to operate, it should be plugged into 10V~15V's voltage supply.At 0°C~70°C, the device operates.There is a current of 200μA at startup.The component's pin number remains 8.FAN4803 is the device's best feature.Switching occurs at a frequency of 67kHz.Located on Mount Through Hole, it is a part of the mountain range.Depending on the supply temperature, it will work with a maximum of 4mA.When operating, it should be warmer than 0°C.At this point, the maximum operating temperature is 70°C.It can only work with a supply voltage of 11.5V volts.
FAN4803CP2_NA3E220 Features
FAN4803CP2_NA3E220 Applications
There are a lot of ON Semiconductor FAN4803CP2_NA3E220 PFC PMICs applications.
- Signal chain
- Switching regulator
- EPS (Electric Power Steering)
- SoC
- CAV (Connected and Automated Vehicle)
- Workstations
- Car eCall
- Portable medical devices
- Low-voltage microprocessor power supplies
- PLL (Phase-Locked Loop)