EPM7512BTC144-10
| Parameters | |
|---|---|
| Number of I/O | 120 |
| Clock Frequency | 163.9MHz |
| Propagation Delay | 5.5 ns |
| Number of Gates | 10000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Voltage Supply - Internal | 2.375V~2.625V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | MAX® 7000B |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | EPM7512 |
| JESD-30 Code | S-PQFP-G144 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 2.625V |
| Power Supplies | 1.8/3.32.5V |
| Supply Voltage-Min (Vsup) | 2.375V |
| Programmable Type | In System Programmable |
EPM7512BTC144-10 Overview
512 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The item is enclosed in a 144-LQFP package.As you can see, this device has 120 I/O ports programmed into it.There are 144 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.An electrical supply voltage of 2.5V is used to power it.It is a part of family [0].It is recommended that the chip be packaged by Tray.It operates with the operating temperature of 0°C~70°C TA to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.In FPGA terms, it is a type of MAX? 7000Bseries FPGA.Additionally, this device is capable of displaying [0].You can find its related parts in the [0].A digital circuit can be constructed using 10000gates.This logic block consists of 32logic elements.A total of 1.8/3.32.5V power supplies are needed to run it.There is a maximum supply voltage (Vsup) of 2.625V.If the supply voltage (Vsup) is greater than 2.375V, then the device will work properly.It is recommended that the clock frequency not exceed 163.9MHz.
EPM7512BTC144-10 Features
144-LQFP package
120 I/Os
The operating temperature of 0°C~70°C TA
1.8/3.32.5V power supplies
EPM7512BTC144-10 Applications
There are a lot of Intel EPM7512BTC144-10 CPLDs applications.
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- PULSE WIDTH MODULATION (PWM)
- STANDARD SERIAL INTERFACE UART
- ON-CHIP OSCILLATOR CIRCUIT
- Dedicated input registers
- High speed graphics processing
- INTERRUPT SYSTEM
- D/T registers and latches
- Auxiliary Power Supply Isolated and Non-isolated
- LED Lighting systems