EPM7512AEFI256-10N
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 256 |
| Published | 1998 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 212 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 116.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 10000 |
| Number of Programmable I/O | 212 |
| Number of Logic Blocks (LABs) | 32 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 2.1mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7512AEFI256-10N Overview
The mobile phone network has 512 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).The item is enclosed in a FBGA package.There are 212 I/Os programmed in it.256terminations are programmed into the device.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.It is powered by a voltage of 3.3V volts.There is a part included in Programmable Logic Devices.In this chip, the 256pins are programmed.This device can also display [0].In digital circuits, there are 10000gates, which act as a basic building block.High efficiency requires a voltage supply of [0].In general, it is recommended to store data in [0].In this case, Surface Mountis used to mount the electronic component.This board has 256 pins.In this case, the maximum supply voltage is 3.6V.The minimal supply voltage is 3V.Programmable I/Os are counted up 212.This frequency is 125MHz.Operating temperatures should be higher than 0°C.Temperatures should be lower than 85°C when operating.The program consists of 32 logic blocks (LABs).It is recommended that the maximal frequency be lower than 116.3MHz.It is possible to classify programmable logic as EE PLD.
EPM7512AEFI256-10N Features
FBGA package
212 I/Os
256 pin count
256 pins
32 logic blocks (LABs)
EPM7512AEFI256-10N Applications
There are a lot of Altera EPM7512AEFI256-10N CPLDs applications.
- Programmable polarity
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- DMA control
- Software-driven hardware configuration
- ON-CHIP OSCILLATOR CIRCUIT
- INTERRUPT SYSTEM
- STANDARD SERIAL INTERFACE UART
- Portable digital devices
- Custom state machines
- Software Configuration of Add-In Boards