EPM7256SRC208-15N
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 208 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 208 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 164 |
| Memory Type | EEPROM |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Frequency (Max) | 128.2MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 5000 |
| Number of Programmable I/O | 164 |
| Number of Logic Blocks (LABs) | 16 |
| Speed Grade | 15 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7256SRC208-15N Overview
There are 256 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is embedded in the PQFP package.This device has 164 I/O ports programmed into it.208terminations have been programmed into the device.This electrical component has a terminal position of 0.An electrical supply voltage of 5V is used to power it.It is a part of family [0].There are 208 pins on the chip.This device can also display [0].In digital circuits, there are 5000gates, which act as a basic building block.For high efficiency, the supply voltage should be maintained at [0].It is recommended that data be stored in [0].This electronic part is mounted in the way of Surface Mount.The 208pins are designed into the board.This device operates at a voltage of 5.25Vas its maximum supply voltage.A minimum supply voltage of 4.75V is required for it to operate.There are 164 Programmable I/Os.There is 100MHz frequency that can be achieved.There should be a temperature above 0°Cat the time of operation.Temperatures should be lower than 70°C when operating.In its simplest form, it consists of 16 logic blocks (LABs).The maximum frequency should not exceed 128.2MHz.Programmable logic types can be divided into EE PLD.
EPM7256SRC208-15N Features
PQFP package
164 I/Os
208 pin count
208 pins
16 logic blocks (LABs)
EPM7256SRC208-15N Applications
There are a lot of Altera EPM7256SRC208-15N CPLDs applications.
- Custom state machines
- DMA control
- INTERRUPT SYSTEM
- Power automation
- Complex programmable logic devices
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- I/O expansion
- Power up sequencing
- I2C BUS INTERFACE
- Programmable power management