EPM7256BTC144-5N
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | 3A991 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Frequency | 250MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 2.625V |
| Min Supply Voltage | 2.375V |
| Number of I/O | 120 |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 5 ns |
| Frequency (Max) | 188.7MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 5000 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 16 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | RoHS Compliant |
EPM7256BTC144-5N Overview
256macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.It is embedded in the TQFP package.There are 120 I/Os on the board.The termination of a device is set to [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.It is powered from a supply voltage of 2.5V.There is a part in the family [0].With 144pins programmed, the chip is ready to use.It is also characterized by YES.As a building block for digital circuits, there are 5000gates.A high level of efficiency can be achieved by maintaining the supply voltage at [0].In general, it is recommended to store data in [0].This device is mounted by Surface Mount.There are 144 pins on the device.With a maximum supply voltage of [0], it operates.It operates with the minimal supply voltage of 2.375V.A total of 36 Programmable I/Os are available.In this case, 250MHzis the frequency that can be achieved.It is recommended that the operating temperature exceeds 0°C.The operating temperature should be lower than 70°C.In total, it contains 16 logic blocks (LABs).It is recommended that the maximal frequency be lower than 188.7MHz.Programmable logic types are divided into EE PLD.
EPM7256BTC144-5N Features
TQFP package
120 I/Os
144 pin count
144 pins
16 logic blocks (LABs)
EPM7256BTC144-5N Applications
There are a lot of Altera EPM7256BTC144-5N CPLDs applications.
- LED Lighting systems
- Interface bridging
- Protection relays
- Address decoders
- Complex programmable logic devices
- High speed graphics processing
- Page register
- Software-driven hardware configuration
- Power automation
- Programmable polarity