EPM7192SQC160-15N
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 160 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 160 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 160 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 124 |
| Memory Type | EEPROM |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Frequency (Max) | 125MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 3750 |
| Number of Programmable I/O | 124 |
| Number of Logic Blocks (LABs) | 12 |
| Speed Grade | 15 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 4.07mm |
| Length | 28mm |
| Width | 28mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7192SQC160-15N Overview
There are 192 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is contained in package [0].As you can see, this device has 124 I/O ports programmed into it.There are 160 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part is wired with a terminal position of QUAD.The power source is powered by 5Vvolts.There is a part included in Programmable Logic Devices.160pins are programmed on the chip.When using this device, CONFIGURABLE I/O OPERATION WITH 3.3V OR 5Vcan also be found.3750gates are used to construct digital circuits.High efficiency requires a voltage supply of [0].Data storage is performed using [0].It is mounted by Surface Mount.There are 160 pins embedded in the device.There is a maximum supply voltage of 5.25Vwhen the device is operating.It operates with the minimal supply voltage of 4.75V.A total of 124programmable I/Os are available.In this case, 100MHzis the frequency that can be achieved.The operating temperature should be higher than 0°C.A temperature below 70°Cshould be used as the operating temperature.In its simplest form, it consists of 12 logic blocks (LABs).It is recommended that the maximal frequency be lower than 125MHz.In programmable logic, a type of logic can be categorized as EE PLD.
EPM7192SQC160-15N Features
PQFP package
124 I/Os
160 pin count
160 pins
12 logic blocks (LABs)
EPM7192SQC160-15N Applications
There are a lot of Altera EPM7192SQC160-15N CPLDs applications.
- Digital systems
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Digital multiplexers
- Page register
- D/T registers and latches
- Storage Cards and Storage Racks
- Portable digital devices
- Configurable Addressing of I/O Boards
- Custom shift registers
- Code converters