EPM7160SLC84-10
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 84 |
| Published | 1998 |
| Part Status | Discontinued |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Frequency | 125MHz |
| Operating Supply Voltage | 5V |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 64 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 149.3MHz |
| Number of Logic Elements/Cells | 10 |
| Number of Gates | 3200 |
| Number of Programmable I/O | 64 |
| Number of Logic Blocks (LABs) | 10 |
| Speed Grade | 10 |
| Number of Macro Cells | 160 |
| Height | 3.81mm |
| Length | 29.31mm |
| Width | 29.31mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7160SLC84-10 Overview
There are 160 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.In the PLCCpackage, you will find it.It is equipped with 64I/O ports.3200gates are used to construct digital circuits.The supply voltage should be maintained at 5V for high efficiency.It is adopted to store data in [0].This device is mounted by Surface Mount.It is designed with 84 pins.This device operates at a voltage of 5.25V when the maximum supply voltage is applied.It is powered by 4.75Vas its minimum supply voltage.There are a total of 64 Programmable I/Os.There is 125MHz frequency that can be achieved.Operating temperatures should be higher than 0°C.It is recommended that the operating temperature be lower than 70°C.The logic block consists of 10 l logic blocks (LABs).There are 10 logic elements/cells on the device.Maximum frequency should be less than 149.3MHz.
EPM7160SLC84-10 Features
PLCC package
64 I/Os
84 pins
10 logic blocks (LABs)
EPM7160SLC84-10 Applications
There are a lot of Altera EPM7160SLC84-10 CPLDs applications.
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Address decoders
- ROM patching
- Random logic replacement
- PLC analog input modules
- STANDARD SERIAL INTERFACE UART
- Custom state machines
- Programmable polarity
- Auxiliary Power Supply Isolated and Non-isolated
- Synchronous or asynchronous mode