EPM7160EQI100-15
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 100 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 84 |
| Memory Type | EEPROM |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Frequency (Max) | 100MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 3200 |
| Number of Programmable I/O | 84 |
| Number of Logic Blocks (LABs) | 10 |
| Speed Grade | 15 |
| Output Function | MACROCELL |
| Number of Macro Cells | 160 |
| JTAG BST | NO |
| In-System Programmable | NO |
| Height Seated (Max) | 3.65mm |
| Length | 20mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
EPM7160EQI100-15 Overview
A mobile phone network consists of 160macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).It is embedded in the PQFP package.In this case, there are 84 I/Os programmed.The device is programmed with 100 terminations.This electrical part has a terminal position of QUADand is connected to the ground.Power is supplied by a voltage of 5V volts.The part belongs to Programmable Logic Devices family.A chip with 100pins is programmed.The device can also be used to find [0].A digital circuit is built using 3200gates.It is recommended that the supply voltage be kept at 5Vto maximize efficiency.It is recommended to store data in [0].It is mounted by Surface Mount.A total of 100pins are provided on this board.With a maximum supply voltage of [0], it operates.Normally, it operates with a voltage of 4.75VV as its minimum supply voltage.There are 84 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. This can be achieved at a frequency of 100MHz.Operating temperatures should be higher than -40°C.It is recommended to keep the operating temperature below 85°C.It is composed of 10 logic blocks (LABs).It is recommended that the maximal frequency be less than 0.A programmable logic type can be categorized as EE PLD.
EPM7160EQI100-15 Features
PQFP package
84 I/Os
100 pin count
100 pins
10 logic blocks (LABs)
EPM7160EQI100-15 Applications
There are a lot of Altera EPM7160EQI100-15 CPLDs applications.
- Discrete logic functions
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- INTERRUPT SYSTEM
- Power up sequencing
- Programmable power management
- Reset swapping
- I/O expansion
- Software-driven hardware configuration
- ROM patching
- Configurable Addressing of I/O Boards