EPM7128STC100-7N
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 147.1MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 84 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 147.1MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Programmable I/O | 84 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7128STC100-7N Overview
There are 128 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).TQFPis the package in which it resides.The device is programmed with 84 I/Os.There is a 100terminations set on devices.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.Power is supplied by a voltage of 5V volts.It is a part of the family [0].It is programmed with 100 pins.This device is also capable of displaying [0].A digital circuit can be constructed using 2500gates.High efficiency requires a voltage supply of [0].Data storage is performed using [0].Surface Mountmounts this electronic component.A total of 100pins are provided on this board.It operates with the maximal supply voltage of 5.25V.Initially, it requires a voltage of 4.75Vas the minimum supply voltage.There are 84 Programmable I/Os.In this case, 147.1MHzis the frequency that can be achieved.There should be a temperature above 0°Cat the time of operation.A temperature less than 70°Cshould be used for operation.The logic block consists of 8 l logic blocks (LABs).It is recommended that the maximal frequency be lower than 147.1MHz.Programmable logic types can be divided into EE PLD.
EPM7128STC100-7N Features
TQFP package
84 I/Os
100 pin count
100 pins
8 logic blocks (LABs)
EPM7128STC100-7N Applications
There are a lot of Altera EPM7128STC100-7N CPLDs applications.
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Portable digital devices
- Timing control
- Address decoders
- I2C BUS INTERFACE
- Power up sequencing
- I/O expansion
- Code converters
- Custom state machines
- Dedicated input registers