EPM7128STC100-10N
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 84 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 147.1MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Programmable I/O | 84 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 1mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7128STC100-10N Overview
128 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.You can find it in package [0].There are 84 I/Os programmed in it.There is a 100terminations set on devices.Its terminal position is QUAD.Power is provided by a supply voltage of 5V volts.It is included in Programmable Logic Devices.With 100pins programmed, the chip is ready to use.This device can also display [0].A digital circuit can be constructed using 2500gates.High efficiency requires a voltage supply of [0].It is recommended that data be stored in [0].A Surface Mountis mounted on this electronic component.This board has 100 pins.It operates with the maximal supply voltage of 5.25V.Normally, it operates with a voltage of 4.75VV as its minimum supply voltage.There are 84 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. It is possible to achieve a frequency of 100MHz.It is recommended that the operating temperature exceed 0°C.A temperature below 70°Cshould be used as the operating temperature.The system consists of 8 logic blocks (LABs).It is recommended that the maximal frequency be lower than 147.1MHz.A programmable logic type is classified as EE PLD.
EPM7128STC100-10N Features
TQFP package
84 I/Os
100 pin count
100 pins
8 logic blocks (LABs)
EPM7128STC100-10N Applications
There are a lot of Altera EPM7128STC100-10N CPLDs applications.
- Reset swapping
- PLC analog input modules
- Programmable power management
- Software Configuration of Add-In Boards
- Storage Cards and Storage Racks
- Protection relays
- Custom state machines
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Handheld digital devices
- POWER-SAVING MODES