EPM7128STC100-10
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3/55V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 84 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 147.1MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Programmable I/O | 84 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.27mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7128STC100-10 Overview
128 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The item is enclosed in a TQFP package.There are 84 I/Os programmed in it.100terminations have been programmed into the device.There is a QUADterminal position on the electrical part in question.The device is powered by a voltage of 5V volts.There is a part in the family [0].It is recommended to package the chip by Bulk.There are 100 pins on the chip.The device can also be used to find [0].For digital circuits, there are 2500gates. These devices serve as building blocks.Data is stored using [0].In this case, it is mounted by Surface Mount.This board has 100 pins.A maximum voltage of 3.6Vis required for operation.The device is designed to operate with a minimal supply voltage of 3VV.There is 3.3/55V power supply available for it.A total of 84Programmable I/Os are present.This can be achieved at a frequency of 125MHz.It is recommended that the operating temperature exceeds 0°C.There should be a temperature below 70°Cat the time of operation.The program consists of 8 logic blocks (LABs).It is recommended that the maximum frequency be less than 147.1MHz.Types of programmable logic are divided into EE PLD.
EPM7128STC100-10 Features
TQFP package
84 I/Os
100 pin count
100 pins
3.3/55V power supplies
8 logic blocks (LABs)
EPM7128STC100-10 Applications
There are a lot of Altera EPM7128STC100-10 CPLDs applications.
- Custom state machines
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- LED Lighting systems
- PULSE WIDTH MODULATION (PWM)
- DMA control
- STANDARD SERIAL INTERFACE UART
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Reset swapping
- Dedicated input registers
- Programmable power management