EPM7128SQC160-7
| Parameters | |
|---|---|
| Min Supply Voltage | 4.75V |
| Number of I/O | 100 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 147.1MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Programmable I/O | 100 |
| Number of Logic Blocks (LABs) | 8 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 4.07mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 160 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 160 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 166.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 160 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
EPM7128SQC160-7 Overview
There are 128 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.In the PQFPpackage, you will find it.The device is programmed with 100 I/O ports.It is programmed that device terminations will be 160 .Its terminal position is QUAD.An electrical supply voltage of 5V is used to power it.There is a part in the family [0].160pins are programmed on the chip.The device can also be used to find [0].There are 2500 gates, which are devices that acts as a building block for digital circuits. Optimal efficiency requires a supply voltage of [0].In general, it is recommended to store data in [0].The electronic part is mounted by Surface Mount.The device has a pinout of [0].In this case, the maximum supply voltage is 5.25V.Initially, it requires a voltage of 4.75Vas the minimum supply voltage.Currently, there are 100 Programmable I/Os available.You can achieve 166.7MHzfrequencies.There should be a temperature above 0°Cat the time of operation.A temperature lower than 70°Cis recommended for operation.The logic block consists of 8 l logic blocks (LABs).It is recommended that the maximum frequency is less than 0.Programmable logic types can be divided into EE PLD.
EPM7128SQC160-7 Features
PQFP package
100 I/Os
160 pin count
160 pins
8 logic blocks (LABs)
EPM7128SQC160-7 Applications
There are a lot of Altera EPM7128SQC160-7 CPLDs applications.
- INTERRUPT SYSTEM
- Pattern recognition
- Power Meter SMPS
- Bootloaders for FPGAs
- Random logic replacement
- Protection relays
- POWER-SAVING MODES
- ON-CHIP OSCILLATOR CIRCUIT
- STANDARD SERIAL INTERFACE UART
- Software-Driven Hardware Configuration