EPM7128SQC100-7N
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 100 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 147.1MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 84 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 147.1MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 3.65mm |
| Length | 20mm |
| Width | 14mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7128SQC100-7N Overview
There are 128 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.The item is enclosed in a PQFP package.The device is programmed with 84 I/Os.The device is programmed with 100 terminations.This electrical component has a terminal position of 0.It is powered by a voltage of 5V volts.It is a part of the family [0].There are 100pins on the chip.When using this device, CONFIGURABLE I/O OPERATION WITH 3.3V OR 5Vis also available.There are 2500 gates, which are devices that acts as a building block for digital circuits. In order to achieve high efficiency, the supply voltage should be maintained at [0].For storing data, it is recommended to use [0].Surface Mountis the mounting point of this electronic part.This board has 100 pins.There is a maximum supply voltage of 5.25V.With a minimal supply voltage of [0], it operates.There can be 147.1MHz frequency achieved.It is recommended that the operating temperature be greater than 0°C.Temperatures should not exceed 70°C.There are 8 logic blocks (LABs) in its basic building block.There should be a lower maximum frequency than 147.1MHz.In programmable logic, a type of logic can be categorized as EE PLD.
EPM7128SQC100-7N Features
PQFP package
84 I/Os
100 pin count
100 pins
8 logic blocks (LABs)
EPM7128SQC100-7N Applications
There are a lot of Altera EPM7128SQC100-7N CPLDs applications.
- Bootloaders for FPGAs
- PULSE WIDTH MODULATION (PWM)
- Voltage level translation
- TIMERS/COUNTERS
- High speed graphics processing
- Configurable Addressing of I/O Boards
- DMA control
- Parity generators
- POWER-SAVING MODES
- Handheld digital devices