EPM7128SQC100-6N
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 100 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Frequency | 166.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 84 |
| Memory Type | EEPROM |
| Propagation Delay | 6 ns |
| Turn On Delay Time | 6 ns |
| Frequency (Max) | 147.1MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Programmable I/O | 84 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 6 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Length | 20mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7128SQC100-6N Overview
In the mobile phone network, there are 128macro cells, which are cells with high-power antennas and towers.It is contained in package [0].The device is programmed with 84 I/O ports.There are 100 terminations programmed into the device.This electrical component has a terminal position of 0.The power supply voltage is 5V.There is a part in the family [0].With 100pins programmed, the chip is ready to use.This device can also display [0].The 2500gates serve as building blocks for digital circuits.If high efficiency is to be achieved, the supply voltage should be maintained at [0].In order to store data, EEPROMis used.Surface Mountis used to mount this electronic component.100pins are included in its design.This device operates at a voltage of 5.25Vas its maximum supply voltage.A minimum supply voltage of 4.75V is required for this device to operate.A total of 84programmable I/Os are available.There is 166.7MHz frequency that can be achieved.In order to operate, the temperature should be higher than 0°C.It is recommended that the operating temperature be lower than 70°C.8logic blocks (LABs) make up this circuit.It is recommended that the maximum frequency is less than 0.Types of programmable logic are divided into EE PLD.
EPM7128SQC100-6N Features
PQFP package
84 I/Os
100 pin count
100 pins
8 logic blocks (LABs)
EPM7128SQC100-6N Applications
There are a lot of Altera EPM7128SQC100-6N CPLDs applications.
- Random logic replacement
- Software-Driven Hardware Configuration
- Digital designs
- Boolean function generators
- Pattern recognition
- D/T registers and latches
- INTERRUPT SYSTEM
- Timing control
- Auxiliary Power Supply Isolated and Non-isolated
- ANALOG-TO-DIGITAL CONVERTOR (ADC)