EPM7128SLC84-7
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 84 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 84 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Frequency | 166.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 84 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 68 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 147.1MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Programmable I/O | 68 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 3.81mm |
| Length | 29.31mm |
| Width | 29.31mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7128SLC84-7 Overview
There are 128 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.It is part of the PLCC package.As a result, it has 68 I/O ports programmed.84terminations have been programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.It is powered by a voltage of 5V volts.It is a part of family [0].There are 84 pins on the chip.This device is also capable of displaying [0].It is possible to construct digital circuits using 2500gates, which are devices that serve as building blocks.Optimal efficiency requires a supply voltage of [0].Data storage is performed using [0].The electronic component is mounted by Surface Mount.There are 84pins on it.There is a maximum supply voltage of 5.25V.The device is designed to operate with a minimal supply voltage of 4.75VV.Currently, there are 68 Programmable I/Os available.In this case, 166.7MHzis the frequency that can be achieved.In order to operate, the temperature should be higher than 0°C.It is recommended that the operating temperature be below 70°C.Its basic building block is composed of 8 logic blocks (LABs).It should be below 147.1MHzat the maximal frequency.Programmable logic types can be divided into EE PLD.
EPM7128SLC84-7 Features
PLCC package
68 I/Os
84 pin count
84 pins
8 logic blocks (LABs)
EPM7128SLC84-7 Applications
There are a lot of Altera EPM7128SLC84-7 CPLDs applications.
- Battery operated portable devices
- INTERRUPT SYSTEM
- D/T registers and latches
- LED Lighting systems
- Custom shift registers
- Power up sequencing
- State machine control
- Cross-Matrix Switch
- Voltage level translation
- Wide Vin Industrial low power SMPS