EPM7064STI44-7
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 44 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 166.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 175.4MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 4 |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7064STI44-7 Overview
There are 64 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.The item is enclosed in a TQFP package.There are 36 I/Os on the board.There are 44 terminations programmed into the device.This electrical part has a terminal position of QUADand is connected to the ground.The device is powered by a voltage of 5V volts.There is a part in the family [0].Chips are programmed with 44 pins.1250gates are devices that serve as building blocks for digital circuits.For high efficiency, the supply voltage should be maintained at [0].It is recommended to store data in [0].Surface Mountis used to mount this electronic component.There are 44pins on it.It operates with the maximal supply voltage of 5.5V.Initially, it requires a voltage of 4.5Vas the minimum supply voltage.It runs on a voltage of 5Vvolts.In total, there are 36programmable I/Os.This can be achieved at a frequency of 166.7MHz.In order to operate, the temperature should be higher than -40°C.Temperatures should be lower than 85°C when operating.There are 4logic blocks (LABs) that make up its basic building block.It should be below 175.4MHzat the maximal frequency.In programmable logic, a type of logic can be categorized as EE PLD.
EPM7064STI44-7 Features
TQFP package
36 I/Os
44 pin count
44 pins
5V power supplies
4 logic blocks (LABs)
EPM7064STI44-7 Applications
There are a lot of Altera EPM7064STI44-7 CPLDs applications.
- Digital multiplexers
- Bootloaders for FPGAs
- Boolean function generators
- Battery operated portable devices
- Custom shift registers
- DDC INTERFACE
- Field programmable gate
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- White goods (Washing, Cold, Aircon ,...)