EPM7064BTI44-5
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 44 |
| Published | 2014 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.8mm |
| Frequency | 250MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Power Supplies | 1.8/3.32.5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 5 ns |
| Frequency (Max) | 303MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 4 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.27mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | RoHS Compliant |
EPM7064BTI44-5 Overview
There are 64 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).The item is packaged with TQFP.The device is programmed with 36 I/O ports.There are 44 terminations programmed into the device.This electrical part is wired with a terminal position of QUAD.There is 2.5V voltage supply for this device.It is a part of family [0].It is programmed with 44 pins.This device is also capable of displaying [0].In digital circuits, there are 1250gates, which act as a basic building block.In this case, EEPROMwill be used to store the data.Surface Mountmounts this electronic component.The 44pins are designed into the board.This device operates at a voltage of 3.6V when the maximum supply voltage is applied.With a minimal supply voltage of [0], it operates.There is 1.8/3.32.5V power supply available for it.There are 36 programmable I/Os in this system.In this case, 250MHzis the frequency that can be achieved.Operating temperatures should be higher than -40°C.Temperatures should not exceed 85°C.4logic blocks (LABs) make up this circuit.The maximal frequency should be lower than 303MHz.In programmable logic, a type of logic can be categorized as EE PLD.
EPM7064BTI44-5 Features
TQFP package
36 I/Os
44 pin count
44 pins
1.8/3.32.5V power supplies
4 logic blocks (LABs)
EPM7064BTI44-5 Applications
There are a lot of Altera EPM7064BTI44-5 CPLDs applications.
- PULSE WIDTH MODULATION (PWM)
- Custom shift registers
- DMA control
- TIMERS/COUNTERS
- Parity generators
- Storage Cards and Storage Racks
- Complex programmable logic devices
- State machine control
- STANDARD SERIAL INTERFACE UART
- Wide Vin Industrial low power SMPS