EPM7064AETC44-4N
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 44 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 250MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 44 |
| Number of Outputs | 36 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 4.5 ns |
| Turn On Delay Time | 4.5 ns |
| Frequency (Max) | 222.2MHz |
| Architecture | PLA-TYPE |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 4 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.27mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7064AETC44-4N Overview
64macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.The item is enclosed in a TQFP package.This device has 36 I/O ports programmed into it.There is a 44terminations set on devices.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.Power is provided by a supply voltage of 3.3V volts.This part is part of the family [0].With 44pins programmed, the chip is ready to use.For digital circuits, there are 1250gates. These devices serve as building blocks.High efficiency requires the supply voltage to be maintained at [0].In this case, EEPROMwill be used to store the data.In this case, Surface Mountis used to mount the electronic component.There are 44 pins on the device.There is a maximum supply voltage of 3.6Vwhen the device is operating.In order for it to operate, a supply voltage of 3Vis required.Currently, there are 36 Programmable I/Os available.This can be achieved at a frequency of 250MHz.Operating temperatures should be higher than 0°C.Temperatures should be lower than 70°C when operating.Its basic building block is composed of 4 logic blocks (LABs).If the maximal frequency is less than [0], it should be lower than that.It is possible to classify programmable logic as EE PLD.This device is configured with a 36 output.
EPM7064AETC44-4N Features
TQFP package
36 I/Os
44 pin count
44 pins
4 logic blocks (LABs)
36 outputs
EPM7064AETC44-4N Applications
There are a lot of Altera EPM7064AETC44-4N CPLDs applications.
- PULSE WIDTH MODULATION (PWM)
- Multiple Clock Source Selection
- Multiple DIP Switch Replacement
- Configurable Addressing of I/O Boards
- Reset swapping
- Software-driven hardware configuration
- USB Bus
- Random logic replacement
- Complex programmable logic devices
- Synchronous or asynchronous mode