EPM7064AETC44-10N
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 44 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 222.2MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 222.2MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Logic Blocks (LABs) | 4 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 950μm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7064AETC44-10N Overview
There are 64 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is part of the TQFP package.There are 36 I/Os on the board.44terminations are programmed into the device.Its terminal position is QUAD.A voltage of 3.3Vprovides power to the device.There is a part in the family [0].It has 44pins programmed.In digital circuits, 1250gates serve as building blocks.It is recommended that the supply voltage be kept at 3.3Vto maximize efficiency.It is recommended to store data in [0].This electronic part is mounted in the way of Surface Mount.The pins are [0].In this case, the maximum supply voltage is 3.6V.In order for it to operate, a supply voltage of 3Vis required.The frequency that can be achieved is 222.2MHz.Operating temperatures should be higher than 0°C.The operating temperature should be lower than 70°C.The program consists of 4 logic blocks (LABs).If the maximal frequency is less than [0], it should be lower than that.This kind of FPGA is composed of EE PLD.
EPM7064AETC44-10N Features
TQFP package
36 I/Os
44 pin count
44 pins
4 logic blocks (LABs)
EPM7064AETC44-10N Applications
There are a lot of Altera EPM7064AETC44-10N CPLDs applications.
- LED Lighting systems
- DMA control
- Reset swapping
- Pattern recognition
- Field programmable gate
- Bootloaders for FPGAs
- PLC analog input modules
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Page register
- Discrete logic functions