EPM7064AETC100-10N
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 68 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 222.2MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 68 |
| Number of Logic Blocks (LABs) | 4 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 1mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7064AETC100-10N Overview
There are 64 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).It is part of the TQFP package.It is equipped with 68I/O ports.100terminations have been programmed into the device.This electrical part is wired with a terminal position of QUAD.Power is supplied by a voltage of 3.3V volts.It is a part of family [0].There are 100pins on the chip.If you use this device, you will also find [0].A digital circuit can be constructed using 1250gates.High efficiency requires the supply voltage to be maintained at [0].It is recommended to store data in [0].In this case, it is mounted by Surface Mount.The device is designed with pins [0].This device operates at a voltage of 3.6Vas its maximum supply voltage.Initially, it requires a voltage of 3Vas the minimum supply voltage.A total of 68 Programmable I/Os are available.You can achieve 100MHzfrequencies.There should be a temperature above 0°Cat the time of operation.There should be a temperature below 70°Cat the time of operation.There are 4 logic blocks (LABs) in its basic building block.A maximum frequency of less than 222.2MHzis recommended.A programmable logic type is classified as EE PLD.
EPM7064AETC100-10N Features
TQFP package
68 I/Os
100 pin count
100 pins
4 logic blocks (LABs)
EPM7064AETC100-10N Applications
There are a lot of Altera EPM7064AETC100-10N CPLDs applications.
- Power Meter SMPS
- Random logic replacement
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Auxiliary Power Supply Isolated and Non-isolated
- LED Lighting systems
- ToR/Aggregation/Core Switch and Router
- PLC analog input modules
- I2C BUS INTERFACE
- High speed graphics processing
- Multiple Clock Source Selection