EPM7032SLI44-7
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 44 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Frequency | 166.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Programmable Logic Type | EE PLD |
| Number of Gates | 600 |
| Number of Logic Blocks (LABs) | 2 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| In-System Programmable | YES |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7032SLI44-7 Overview
This network has 32macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).It is embedded in the PLCC package.The device has 36inputs and outputs.It is programmed to terminate devices at [0].This electrical component has a terminal position of 0.It is powered from a supply voltage of 5V.There is a part included in Programmable Logic Devices.44pins are programmed on the chip.As a building block for digital circuits, there are 600gates.A high level of efficiency can be achieved by maintaining the supply voltage at [0].In order to store data, EEPROMis used.Surface Mountmounts this electronic component.44pins are included in its design.In this case, the maximum supply voltage is 5.5V.With a minimal supply voltage of [0], it operates.In order for the device to operate, it requires 5V power supplies.There is 166.7MHz frequency that can be achieved.There should be a temperature above -40°Cat the time of operation.A temperature below 85°Cshould be used as the operating temperature.The program consists of 2 logic blocks (LABs).A programmable logic type is categorized as EE PLD.
EPM7032SLI44-7 Features
PLCC package
36 I/Os
44 pin count
44 pins
5V power supplies
2 logic blocks (LABs)
EPM7032SLI44-7 Applications
There are a lot of Altera EPM7032SLI44-7 CPLDs applications.
- Custom shift registers
- Timing control
- Digital designs
- Auxiliary Power Supply Isolated and Non-isolated
- I/O PORTS (MCU MODULE)
- DDC INTERFACE
- Power automation
- I2C BUS INTERFACE
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Digital systems