EPM7032QC44-6
| Parameters | |
|---|---|
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.75V |
| Number of I/O | 32 |
| Clock Frequency | 151.5MHz |
| Propagation Delay | 6 ns |
| Programmable Logic Type | EE PLD |
| Number of Gates | 600 |
| Number of Logic Blocks (LABs) | 2 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | NO |
| In-System Programmable | NO |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | Non-RoHS Compliant |
| Package / Case | PQFP |
| Surface Mount | YES |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Programmable Logic Devices |
EPM7032QC44-6 Overview
There are 32 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).In the PQFPpackage, you will find it.It is programmed with 32 I/Os.44terminations are programmed into the device.There is a QUADterminal position on the electrical part in question.The device is powered by a voltage of 5V volts.It is a part of family [0].In this chip, the 44pins are programmed.For digital circuits, there are 600gates. These devices serve as building blocks.There is 5V power supply available for it.In its simplest form, it consists of 2 logic blocks (LABs).Ensure that the supply voltage (Vsup) exceeds 4.75V.A frequency of 151.5MHzshould not be exceeded by its clock.Types of programmable logic are divided into EE PLD.It is recommended that the operating temperature remain below 70°C.
EPM7032QC44-6 Features
PQFP package
32 I/Os
44 pin count
5V power supplies
2 logic blocks (LABs)
EPM7032QC44-6 Applications
There are a lot of Altera EPM7032QC44-6 CPLDs applications.
- PLC analog input modules
- Interface bridging
- Synchronous or asynchronous mode
- Software-Driven Hardware Configuration
- Wide Vin Industrial low power SMPS
- Handheld digital devices
- Parity generators
- PULSE WIDTH MODULATION (PWM)
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- ROM patching