EPM7032BUC49-3N
| Parameters | |
|---|---|
| RoHS Status | RoHS Compliant |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 49 |
| Published | 2014 |
| JESD-609 Code | e1 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 49 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 49 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 3.5 ns |
| Frequency (Max) | 227.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 600 |
| Number of Programmable I/O | 41 |
| Number of Logic Blocks (LABs) | 2 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.55mm |
| Length | 7mm |
| Width | 7mm |
EPM7032BUC49-3N Overview
This network has 32macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).BGAis the package in which it resides.It is programmed with 36 I/Os.It is programmed that device terminations will be 49 .This electrical part has a terminal position of BOTTOMand is connected to the ground.The device is powered by a voltage of 2.5V volts.There is a part in the family [0].A chip with 49pins is programmed.This device also displays [0].In digital circuits, there are 600gates, which act as a basic building block.It is recommended that the supply voltage be kept at 3.3Vto maximize efficiency.It is adopted to store data in [0].It is mounted by Surface Mount.It is designed with 49 pins.It operates at a maximum supply voltage of 3.6V volts.Normally, it operates with a voltage of 3VV as its minimum supply voltage.A programmable I/O count of 41 has been recorded.In order to operate properly, the operating temperature should be higher than 0°C.Temperatures should be lower than 70°C when operating.The program consists of 2 logic blocks (LABs).Maximum frequency should be less than 227.3MHz.This kind of FPGA is composed of EE PLD.
EPM7032BUC49-3N Features
BGA package
36 I/Os
49 pin count
49 pins
2 logic blocks (LABs)
EPM7032BUC49-3N Applications
There are a lot of Altera EPM7032BUC49-3N CPLDs applications.
- Software-driven hardware configuration
- Boolean function generators
- Interface bridging
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- I/O expansion
- Pattern recognition
- Field programmable gate
- DDC INTERFACE
- Power Meter SMPS
- DMA control