EPM570T144A5N
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 1.8797GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 116 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 8.7 ns |
| Turn On Delay Time | 8.7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Programmable I/O | 116 |
| Number of Logic Blocks (LABs) | 57 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | RoHS Compliant |
EPM570T144A5N Overview
440 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.In the TQFPpackage, you will find it.As you can see, this device has 116 I/O ports programmed into it.Terminations of devices are set to [0].The terminal position of this electrical component is QUAD.An electrical supply voltage of 2.5V is used to power it.This part is in the family [0].144pins are programmed on the chip.This device is also capable of displaying [0].High efficiency requires a voltage supply of [0].Data is stored using [0].In this case, Surface Mountis used to mount the electronic component.There are 144 pins embedded in the device.With a maximum supply voltage of [0], it operates.The device is designed to operate with a minimal supply voltage of 2.375VV.There are 116 Programmable I/Os.The frequency that can be achieved is 1.8797GHz.Operating temperatures should be higher than -40°C.It is recommended that the operating temperature be lower than 125°C.57logic blocks (LABs) make up this circuit.There are 570 logic elements/cells to form a fundamental building block. It should be below 304MHzat the maximal frequency.Using the devices' 1kBmemory, programs and data can be stored.
EPM570T144A5N Features
TQFP package
116 I/Os
144 pin count
144 pins
57 logic blocks (LABs)
EPM570T144A5N Applications
There are a lot of Altera EPM570T144A5N CPLDs applications.
- Power up sequencing
- STANDARD SERIAL INTERFACE UART
- Custom shift registers
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- ROM patching
- I/O PORTS (MCU MODULE)
- Multiple Clock Source Selection
- Code converters
- USB Bus
- I/O expansion