EPM570GF256I5N
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 256 |
| Published | 2003 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1mm |
| Frequency | 1.8797GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 256 |
| Operating Supply Voltage | 1.8V |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 160 |
| Nominal Supply Current | 40mA |
| Memory Type | FLASH |
| Propagation Delay | 8.7 ns |
| Turn On Delay Time | 8.7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Programmable I/O | 160 |
| Number of Logic Blocks (LABs) | 57 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 2.2mm |
| Length | 17mm |
| Width | 17mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
EPM570GF256I5N Overview
The mobile phone network has 440 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).You can find it in package [0].The device has 160inputs and outputs.There is a 256terminations set on devices.This electrical part is wired with a terminal position of BOTTOM.The power supply voltage is 1.8V.There is a part included in Programmable Logic Devices.256pins are programmed on the chip.This device also displays [0].It is recommended that the supply voltage be kept at 1.8Vto maximize efficiency.FLASH is adopted for storing data.Surface Mountis used to mount this electronic component.There are 256 pins embedded in the device.With a maximum supply voltage of [0], it operates.With a minimal supply voltage of [0], it operates.There are a total of 160 Programmable I/Os.There is 1.8797GHz frequency that can be achieved.Ideally, the operating temperature should be greater than -40°C.A temperature lower than 100°Cis recommended for operation.There are 57logic blocks (LABs) that make up its basic building block.A fundamental building block consists of 570logic elements/cells.It is recommended that the maximum frequency is less than 0.The devices embed a memory of 1kB available for storing programs and datas.
EPM570GF256I5N Features
FBGA package
160 I/Os
256 pin count
256 pins
57 logic blocks (LABs)
EPM570GF256I5N Applications
There are a lot of Altera EPM570GF256I5N CPLDs applications.
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- LED Lighting systems
- Power Meter SMPS
- Code converters
- Pattern recognition
- DMA control
- POWER-SAVING MODES
- High speed graphics processing
- STANDARD SERIAL INTERFACE UART
- Interface bridging