EPM570GF256C4N
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 256 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1mm |
| Frequency | 2.3148GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 160 |
| Nominal Supply Current | 40mA |
| Memory Type | FLASH |
| Propagation Delay | 7 ns |
| Turn On Delay Time | 7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Programmable I/O | 160 |
| Number of Logic Blocks (LABs) | 57 |
| Speed Grade | 4 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 2.2mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM570GF256C4N Overview
There are 440 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).It is part of the FBGA package.There are 160 I/Os programmed in it.It is programmed that device terminations will be 256 .There is a BOTTOMterminal position on the electrical part in question.A voltage of 1.8V is used as the power supply for this device.There is a part in the family [0].The chip should be packaged by Bulk.A chip with 256pins is programmed.When using this device, IT CAN ALSO OPERATE AT 3.3Vcan also be found.High efficiency requires a voltage supply of [0].FLASH is adopted for storing data.Surface Mountis used to mount this electronic component.The pins are [0].With a maximum supply voltage of [0], it operates.In order for it to operate, a supply voltage of 1.71Vis required.A total of 160programmable I/Os are available.In this case, 2.3148GHzis the frequency that can be achieved.It is recommended that the operating temperature exceed 0°C.A temperature lower than 85°Cis recommended for operation.In total, it contains 57 logic blocks (LABs).A fundamental building block of logic consists of 570logic elements/cells.It is recommended that the maximum frequency is less than 0.In the devices, there is a memory of 1kBthat can be used to store programs and data.
EPM570GF256C4N Features
FBGA package
160 I/Os
256 pin count
256 pins
57 logic blocks (LABs)
EPM570GF256C4N Applications
There are a lot of Altera EPM570GF256C4N CPLDs applications.
- Parity generators
- Random logic replacement
- Complex programmable logic devices
- Custom shift registers
- I/O expansion
- Software-Driven Hardware Configuration
- Synchronous or asynchronous mode
- Pattern recognition
- Auxiliary Power Supply Isolated and Non-isolated
- Protection relays