EPM3128ATC144-5
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 3.3V |
| Frequency | 250MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 144 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 96 |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 5 ns |
| Frequency (Max) | 192.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Programmable I/O | 96 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM3128ATC144-5 Overview
128macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.The product is contained in a TQFP package.There are 96 I/Os programmed in it.There are 144 terminations programmed into the device.This electrical component has a terminal position of 0.The device is powered by a voltage of 3.3V volts.This part is included in Programmable Logic Devices.As a result, it is packaged as Bulk.It is programmed with 144 pins.It is also characterized by YES.As a building block for digital circuits, there are 2500gates.Optimal efficiency requires a supply voltage of [0].Data storage is performed using [0].Surface Mountis used to mount this electronic component.The device has a pinout of [0].In this case, the maximum supply voltage is 3.6V.Despite its minimal supply voltage of [0], it is capable of operating.A programmable I/O count of 96 has been recorded.There can be 250MHz frequency achieved.It is recommended that the operating temperature exceeds 0°C.Temperatures should be lower than 70°C when operating.The logic block consists of 8 l logic blocks (LABs).Maximum frequency should be less than 192.3MHz.In programmable logic, a type of logic can be categorized as EE PLD.
EPM3128ATC144-5 Features
TQFP package
96 I/Os
144 pin count
144 pins
8 logic blocks (LABs)
EPM3128ATC144-5 Applications
There are a lot of Altera EPM3128ATC144-5 CPLDs applications.
- Portable digital devices
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Digital systems
- STANDARD SERIAL INTERFACE UART
- Page register
- I/O PORTS (MCU MODULE)
- DMA control
- High speed graphics processing
- LED Lighting systems