EPM3128ATC100-7N
| Parameters | |
|---|---|
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 192.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 80 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 192.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Max Junction Temperature (Tj) | 90°C |
| Ambient Temperature Range High | 85°C |
| In-System Programmable | YES |
| Height | 1.2mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Weight | 657.000198mg |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
EPM3128ATC100-7N Overview
There are 128 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.It is embedded in the TQFP package.As you can see, this device has 80 I/O ports programmed into it.The device is programmed with 100 terminations.The terminal position of this electrical component is QUAD.It is powered from a supply voltage of 3.3V.It is a part of the family [0].It is equipped with 100 pin count.This device can also display [0].For digital circuits, there are 2500gates. These devices serve as building blocks.If high efficiency is to be achieved, the supply voltage should be maintained at [0].In this case, EEPROMwill be used to store the data.It is mounted by Surface Mount.It is designed with 100 pins.It operates at a maximum supply voltage of 3.6V volts.Initially, it requires a voltage of 3Vas the minimum supply voltage.This can be achieved at a frequency of 192.3MHz.In order to operate properly, the operating temperature should be higher than 0°C.There should be a temperature below 70°Cat the time of operation.It is composed of 8 logic blocks (LABs).It is recommended that the maximal frequency be lower than 192.3MHz.A programmable logic type is categorized as EE PLD.
EPM3128ATC100-7N Features
TQFP package
80 I/Os
100 pin count
100 pins
8 logic blocks (LABs)
EPM3128ATC100-7N Applications
There are a lot of Altera EPM3128ATC100-7N CPLDs applications.
- Digital systems
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Timing control
- PULSE WIDTH MODULATION (PWM)
- Power up sequencing
- Address decoding
- Power Meter SMPS
- STANDARD SERIAL INTERFACE UART
- Multiple Clock Source Selection
- Handheld digital devices