EPM240T100A5N
| Parameters | |
|---|---|
| Factory Lead Time | 14 Weeks |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Frequency | 1.8797GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 80 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 240 |
| Number of Programmable I/O | 80 |
| Number of Logic Blocks (LABs) | 24 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
EPM240T100A5N Overview
There are 192 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).It is embedded in the TQFP package.There are 80 I/Os on the board.There are 100 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.There is a QUADterminal position on the electrical part in question.The device is powered by a voltage of 2.5V volts.It is included in Programmable Logic Devices.The chip is programmed with 100 pins.If this device is used, you will also be able to find [0].For high efficiency, the supply voltage should be maintained at [0].Data is stored using [0].A Surface Mountis mounted on this electronic component.The 100pins are designed into the board.With a maximum supply voltage of [0], it operates.It operates with the minimal supply voltage of 2.375V.There are 80 programmable I/Os in this system.A frequency of 1.8797GHzcan be achieved.It is recommended that the operating temperature exceeds -40°C.A temperature less than 125°Cshould be used for operation.There are 24 logic blocks (LABs) in its basic building block.Fundamental building blocks consist of 240logic elements/cells.It should be below 304MHzat the maximal frequency.Devices are equipped with a memory capacity of 1kBfor storing programs and data.
EPM240T100A5N Features
TQFP package
80 I/Os
100 pin count
100 pins
24 logic blocks (LABs)
EPM240T100A5N Applications
There are a lot of Altera EPM240T100A5N CPLDs applications.
- USB Bus
- Power automation
- ROM patching
- Complex programmable logic devices
- Boolean function generators
- Storage Cards and Storage Racks
- POWER-SAVING MODES
- Interface bridging
- Parity generators
- D/T registers and latches