EPM2210GF256C4
| Parameters | |
|---|---|
| In-System Programmable | YES |
| Height Seated (Max) | 2.2mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 12 Weeks |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 256 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 204 |
| Nominal Supply Current | 40mA |
| Memory Type | FLASH |
| Propagation Delay | 9.1 ns |
| Frequency (Max) | 304MHz |
| Number of Programmable I/O | 204 |
| Number of Logic Blocks (LABs) | 2210 |
| Output Function | MACROCELL |
| Number of Macro Cells | 1700 |
| JTAG BST | YES |
EPM2210GF256C4 Overview
In the mobile phone network, there are 1700macro cells, which are cells with high-power antennas and towers.In the FBGApackage, you will find it.As a result, it has 204 I/O ports programmed.Devices are programmed with terminations of [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.There is 1.8V voltage supply for this device.There is a part in the family [0].Bulkshould be used for packaging the chip.In this chip, the 256pins are programmed.The device can also be used to find [0].In order to achieve high efficiency, the supply voltage should be maintained at [0].In general, it is recommended to store data in [0].It is mounted by Surface Mount.It is designed with 256 pins.It operates with the maximal supply voltage of 1.89V.The minimal supply voltage is 1.71V.There are 204 programmable I/Os in this system.It is recommended that the operating temperature be greater than 0°C.A temperature less than 85°Cshould be used for operation.The logic block consists of 2210 l logic blocks (LABs).It is recommended that the maximal frequency be lower than 304MHz.Devices contain a 1kBmemory for storing data and programs.
EPM2210GF256C4 Features
FBGA package
204 I/Os
256 pin count
256 pins
2210 logic blocks (LABs)
EPM2210GF256C4 Applications
There are a lot of Altera EPM2210GF256C4 CPLDs applications.
- Reset swapping
- LED Lighting systems
- Bootloaders for FPGAs
- State machine design
- High speed graphics processing
- Wide Vin Industrial low power SMPS
- DMA control
- Custom shift registers
- Storage Cards and Storage Racks
- Power Meter SMPS