EPM1270T144C4N
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 2.3148GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 144 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 116 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 8.1 ns |
| Turn On Delay Time | 8.1 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 1270 |
| Number of Programmable I/O | 116 |
| Number of Logic Blocks (LABs) | 127 |
| Speed Grade | 4 |
| Output Function | MACROCELL |
| Number of Macro Cells | 980 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM1270T144C4N Overview
The mobile phone network has 980 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).It is embedded in the TQFP package.As you can see, this device has 116 I/O ports programmed into it.144terminations are programmed into the device.This electrical part is wired with a terminal position of QUAD.A voltage of 2.5Vprovides power to the device.There is a part in the family [0].It is packaged in the way of Bulk.There are 144pins on the chip.If this device is used, you will also be able to find [0].If high efficiency is to be achieved, the supply voltage should be maintained at [0].In order to store data, FLASHis used.Surface Mountis the mounting point of this electronic part.There are 144 pins on the device.This device operates at a voltage of 3.6V when the maximum supply voltage is applied.Normally, it operates with a voltage of 2.375VV as its minimum supply voltage.There are 116 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. A frequency of 2.3148GHzcan be achieved.Operating temperatures should be higher than 0°C.Ideally, the operating temperature should be below 85°C.The program consists of 127 logic blocks (LABs).Fundamental building blocks consist of 1270logic elements/cells.It is recommended that the maximum frequency be less than 304MHz.The devices contain a memory of 1kBfor storing programs and data.
EPM1270T144C4N Features
TQFP package
116 I/Os
144 pin count
144 pins
127 logic blocks (LABs)
EPM1270T144C4N Applications
There are a lot of Altera EPM1270T144C4N CPLDs applications.
- Interface bridging
- Discrete logic functions
- State machine design
- Multiple Clock Source Selection
- D/T registers and latches
- Auxiliary Power Supply Isolated and Non-isolated
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Custom shift registers
- Page register
- Digital systems