EPM1270GF256I5N
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Published | 2003 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1mm |
| Frequency | 1.8797GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 256 |
| Operating Supply Voltage | 1.8V |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 212 |
| Nominal Supply Current | 40mA |
| Memory Type | FLASH |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 1270 |
| Number of Programmable I/O | 212 |
| Number of Logic Blocks (LABs) | 127 |
| Output Function | MACROCELL |
| Number of Macro Cells | 980 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 2.2mm |
| Width | 17mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM1270GF256I5N Overview
This network has 980macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).You can find it in package [0].In this case, there are 212 I/Os programmed.It is programmed to terminate devices at [0].BOTTOMis the terminal position of this electrical part.It is powered by a voltage of 1.8V volts.The part is included in Programmable Logic Devices.There are 256pins on the chip.When using this device, IT CAN ALSO OPERATE AT 3.3Vcan also be found.Optimal efficiency requires a supply voltage of [0].For storing data, it is recommended to use [0].Surface Mountmounts this electronic component.It operates at a maximum supply voltage of 1.89V volts.The minimal supply voltage is 1.71V.A total of 212Programmable I/Os are present.In this case, 1.8797GHzis the frequency that can be achieved.The operating temperature should be higher than -40°C.Temperatures should not exceed 100°C.Its basic building block is composed of 127 logic blocks (LABs).There are 1270 logic elements/cells to form a fundamental building block. It should be below 304MHzat the maximal frequency.Devices include a memory of 1kBavailable for the storage of programs and data.
EPM1270GF256I5N Features
FBGA package
212 I/Os
256 pin count
127 logic blocks (LABs)
EPM1270GF256I5N Applications
There are a lot of Altera EPM1270GF256I5N CPLDs applications.
- Software-driven hardware configuration
- ToR/Aggregation/Core Switch and Router
- Address decoders
- Digital multiplexers
- DDC INTERFACE
- Multiple Clock Source Selection
- INTERRUPT SYSTEM
- High speed graphics processing
- Custom shift registers
- Wireless Infrastructure Base Band Unit and Remote Radio Unit