EPC1LC20
| Parameters | |
|---|---|
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 220 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | EPC1 |
| JESD-30 Code | S-PQCC-J20 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | OTP |
| Memory Size | 1Mb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 10MHz |
| Supply Current-Max | 0.05mA |
| Organization | 1046496X1 |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
| Memory Density | 1046496 bit |
| Parallel/Serial | SERIAL |
| I/O Type | COMMON |
| Memory IC Type | CONFIGURATION MEMORY |
| Height Seated (Max) | 4.572mm |
| Length | 8.9662mm |
| Width | 8.9662mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | EPC |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | 3A991.B.2.A |
| Terminal Finish | TIN LEAD |
| Additional Feature | IT CAN ALSO OPERATE AT 5V SUPPLY |
| HTS Code | 8542.32.00.61 |
| Technology | MOS |
| Voltage - Supply | 3V~3.6V 4.75V~5.25V |
EPC1LC20 Overview
FPGA uses a neat 20-LCC (J-Lead) package.Packaging for external use.Licensed to operate in 0°C~70°C.FPGA is programmable through OTP.With a voltage of 3V~3.6V 4.75V~5.25V, it is powered.I have mounted this memory device in Surface Mount.A maximum of 1Mb bytes of data can be stored.To find other similar parts, search for "EPC1".There is a voltage requirement of 3.3V for supplying it with power.Various functions can be applied to 20 terminations.In order to use this memory device, a maximum voltage of 3.6V should be used.3V is the minimum voltage required to supply the device.The memory chip in question is a CONFIGURATION MEMORY memory chip.Reflow soldering should be done at 220°C maximum.Through SERIAL-processing, data is transmitted from this memory to the CPU.An operating voltage of 0.05mA is allowed for the memory chip.I would like to mention that this is a memory IC that will be able to work at a 10MHz frequency, so I will mention that.There is a COMMON configuration for the memory's I/O.The use of a 5V power supply is recommended in order to achieve best results.Memory features IT CAN ALSO OPERATE AT 5V SUPPLY to better serve the need.This is one of the devices that are part of the EPC series.
EPC1LC20 Features
Operating temperature: 0°C~70°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
COMMON I/O equipped.
EPC1LC20 Applications
There are a lot of Intel EPC1LC20 applications of configuration proms for FPGAs.
- multimedia computers
- networking
- eDRAM
- telecommunications
- networks
- Camcorders
- personal digital assistants
- embedded logic
- mainframes
- eSRAM