E-PBL3717A
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Applications | General Purpose |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Base Part Number | PBL3717 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 2 |
| Output Voltage | 46V |
| Max Output Current | 1A |
| Operating Supply Voltage | 36V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Nominal Supply Current | 16mA |
| Output Configuration | Half Bridge (2) |
| Current - Output | 1.2A |
| Logic Function | AND |
| Voltage - Load | 10V~46V |
| Motor Type | Stepper |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2, 1/4 |
| Height Seated (Max) | 5.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
E-PBL3717A Overview
Drivers controllers includes a Tubepackage.There is 16-DIP (0.300, 7.62mm) case included with the part.A mounting position of Through Holeis recommended for the part.The component connected in General Purposematches it perfectly.Drivers controllers is capable of supplying 4.75V~5.25V volts.Drivers controllers operates wDrivers controllershin a range of 0°C~150°C TJdegrees Celsius.In this part, there are 16 terminations available.If the voltage is applied to the load at the rate of [0], the load will be affected.Drivers controllers is important to note that this amplifier should be operated at the 5Vsetting.There is Through Hole recommended mounting method for this device.The output current should be kept at 1.2A for the part.Using the PBL3717part number, it is located.A device with 16pins is available.2outputs are available in total.There is 36V supply voltage required for this driver.Drivers controllers is maintained at 46V volts.0 indicates that the motor type is [0].For compliance with the operation requirements, the maximum output current is [0].
E-PBL3717A Features
Applications : General Purpose
Load voltage across the chip 10V~46V
base on PBL3717 number
designed with 2 outputs
Motor Type classified as Stepper
E-PBL3717A Applications
There are a lot of STMicroelectronics E-PBL3717A motor drivers applications.
- Mobile phone display backlight and key light driving
- Scanning equipment
- AM radio
- Street lights
- drivers for outdoor application
- High power LED street light
- Camera-enabled smartphones
- parking lights
- Camcorders
- RGB and monochromatic LED drivers for signage and traffic signals