E-L6258EP
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L6258 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 2 |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Nominal Supply Current | 15mA |
| Output Configuration | Half Bridge (4) |
| Logic Function | AND |
| Output Current-Max | 2A |
| Collector Emitter Voltage (VCEO) | 40V |
| Max Collector Current | 1.3A |
| Voltage - Load | 12V~40V |
| Max Junction Temperature (Tj) | 150°C |
| Switching Frequency | 15kHz |
| Motor Type | Stepper |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2, 1/4, 1/8, 1/16 |
| Height | 2.47mm |
| Length | 10.5mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 16 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-BFSOP (0.295, 7.50mm Width) Exposed Pad |
| Number of Pins | 36 |
| Manufacturer Package Identifier | PowerSSO-36-7587131 |
| Operating Temperature | 150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | DMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
E-L6258EP Overview
This package is designed to work with [0].This part is packaged with a case of [0].Drivers controllers is recommended to mount the part by Surface Mount.Drivers controllers is fDrivers controllersting for the component connected in General Purpose.A device with a voltage range of 4.75V~5.25V volts is available.Drivers controllers operates wDrivers controllershin a range of 150°C TJdegrees Celsius.The motor type can be classified as Brushed DC.The part supports 36terminations.A voltage of 12V~40Vcan be applied to the load.I would like to remind you that this amplifier should be operated at 5V.The recommended mounting method is Surface Mount.The L6258part number allows us to locate it.36pins are present on the device.Drivers controllers belongs to Motion Control Electronics series.There are a total of 2outputs available.Drivers controllers is possible to recognize the motor type as [0].
E-L6258EP Features
Applications : General Purpose
Load voltage across the chip 12V~40V
base on L6258 number
designed with 2 outputs
Motor Type classified as Stepper
E-L6258EP Applications
There are a lot of STMicroelectronics E-L6258EP motor drivers applications.
- High brightness LED lighting
- Footwell lighting
- Industrial lighting
- Automotive instrumentation
- Lighting for the ambience of tunability
- Dash
- PDAs
- Hospitality buildings
- Indicator circuit
- AM radio