DSPIC33FJ64MC804-E/ML
| Parameters | |
|---|---|
| Core Size | 16-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 76mA |
| Bit Size | 16 |
| Data Converter | A/D 9x10b/12b; D/A 6x16b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 5 |
| On Chip Program ROM Width | 24 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING-POINT |
| Integrated Cache | NO |
| RAM (words) | 8192 |
| Number of Serial I/Os | 2 |
| Number of External Interrupts | 3 |
| On Chip Data RAM Width | 16 |
| Number of DMA Channels | 8 |
| Height Seated (Max) | 1mm |
| Length | 8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 11 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | Automotive, AEC-Q100, dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ64MC804 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, QEI, WDT |
| Program Memory Type | FLASH |
DSPIC33FJ64MC804-E/ML Overview
There is a 44-VQFN Exposed Pad package available to save space. In this case, it is mounted using the method of Surface Mount. There is a Tube package available for it. A dsPIC core processor powers the device. During work, the temperature should remain at -40°C~125°C TA. FLASH has been assigned to it as a program memory. There are 35 I/Os on it, which makes it a very simple device. It has a base part number of DSPIC33FJ64MC804 that can be used to find other components that are comparable. This device has terminals at QUAD. This circuit consists of 44 terminationals. The Automotive, AEC-Q100, dsPIC? 33F series includes this electrical component. Using the 3.3V supply voltage allows for high efficiency. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER. It is constructed with 44 pins. This mount is done in accordance with the method of Surface Mount. 44 pins are on it in total. In the subcategory of Digital Signal Processors, this component is included. Using the devices' 64kB memory size, you can store programs and data. There is a maximum current supply of 76mA. When working at a frequency of 40MHz it is able to achieve excellent efficiency. A designer is able to make full use of the adaptability and supply voltage of 3.3V by using it. 5 counters/timers are currently active. Using an oscillator type Internal, it operates.
DSPIC33FJ64MC804-E/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ64MC804-E/ML Applications
There are a lot of Microchip Technology DSPIC33FJ64MC804-E/ML Microcontroller applications.
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Tape drives
- Hand-held metering systems
- Fax machines
- Equipment control
- Computed Tomography (CT scan)
- Data acquisition and control
- Smoke alarms
- Pacemakers (used to control abnormal heart rhythm)
- Microwave ovens