DSPIC30F6014A-20E/PT
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-TQFP |
| Number of Pins | 80 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| Published | 2006 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F6014A |
| Pin Count | 80 |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 144kB |
| Oscillator Type | Internal |
| Number of I/O | 68 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | AC'97, Brown-out Detect/Reset, I2S, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 144KB 48K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| Density | 1.1 Mb |
| EEPROM Size | 4K x 8 |
| Format | FIXED-POINT |
| Number of ADC Channels | 16 |
| Number of PWM Channels | 8 |
| Number of I2C Channels | 1 |
| Number of SPI Channels | 2 |
| Height | 1.05mm |
| Length | 12mm |
| Width | 12mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F6014A-20E/PT Overview
There is a 80-TQFP package available to save space. Surface Mount is the way to mount it. It comes in a Tray package. dsPIC core processor is present on the device. Maintain a temperature of -40°C~125°C TA while working. The type of memory it uses is FLASH. 68 I/Os are present on the device. A comparable component can be found by using the base part number DSPIC30F6014A. QUAD is the position of its terminals on the board. As far as terminations are concerned, there are 80 terminations present. The dsPIC? 30F series includes this electrical component. By using a 5V voltage supply, high efficiency is possible. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. 80 pins are used to construct it. This mount is done in accordance with the method of Surface Mount. In total, it has 80 pins. In the subcategory of Digital Signal Processors, this component is included. Data and programs can be stored on the devices with a memory size of 144kB. At a frequency of 20MHz, it exhibits excellent efficiency. There are currently 5 timers/counters set up on the system. Using an oscillator type Internal, it operates.
DSPIC30F6014A-20E/PT Features
80-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F6014A-20E/PT Applications
There are a lot of Microchip Technology DSPIC30F6014A-20E/PT Microcontroller applications.
- Fabric
- Fax machines
- Dryers
- Television
- 3D printers
- Digital TVs
- Washing machines
- Ipad
- Vacuum cleaners
- Gas monitoring systems