DSPIC30F6012-20I/PF
| Parameters | |
|---|---|
| Factory Lead Time | 13 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2004 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Termination | SMD/SMT |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F6012 |
| Pin Count | 64 |
| Lead Pitch | 650μm |
| Row Spacing | 16 mm |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 144kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| Speed | 20 MHz |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | AC'97, Brown-out Detect/Reset, I2S, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 144KB 48K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| Density | 1.1 Mb |
| EEPROM Size | 4K x 8 |
| On Chip Program ROM Width | 24 |
| Format | FIXED-POINT |
| RAM (words) | 4096 |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F6012-20I/PF Overview
To save space, it is included in the 64-TQFP package. This is mounted using the Surface Mount method. In the package Tray, it is included. A core processor of dsPIC is present in the device. During work, the temperature should remain at -40°C~85°C TA. FLASH is the type of program memory used by it. 52 I/Os are present on the device. Based on its base part number of DSPIC30F6012, other similarly-sized components can be found. The terminals of this device are located at QUAD. There are a total of 64 terminations in it. This electrical component is part of the dsPIC? 30F series. As a result of the 5V supply voltage, high efficiency is possible. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. 64 pins are used to construct it. It has a total of 64 pins on it. Subcategory Digital Signal Processors includes this component. The devices have a memory size of 144kB that can be used to store programs and data. At a frequency of 40MHz, it can achieve excellent efficiency. There are currently 5 timers/counters set up on the system. There is an oscillator type Internal used in this circuit.
DSPIC30F6012-20I/PF Features
64-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F6012-20I/PF Applications
There are a lot of Microchip Technology DSPIC30F6012-20I/PF Microcontroller applications.
- Heater/Fan
- Smartphones-calling, video calling, texting, email
- Nintendo
- Leakage current tester
- Firewalls
- Refrigerators
- Equipment control
- Set-top boxes
- Radio
- Gas monitoring systems