DSPIC30F3014-20I/ML
| Parameters | |
|---|---|
| Data Converter | A/D 13x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 8192 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 24 |
| Format | FIXED-POINT |
| RAM (words) | 1024 |
| Height Seated (Max) | 1mm |
| Length | 8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | OPERATES AT 2.5 V MINIMUM SUPPLY @ 7.5 MHZ |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F3014 |
| Pin Count | 44 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 24kB |
| Oscillator Type | Internal |
| Number of I/O | 30 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 24KB 8K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
DSPIC30F3014-20I/ML Overview
For the purpose of saving space, it is available in the 44-VQFN Exposed Pad package. Mounted using Surface Mount. Package Tube contains it. Devices with dsPIC core processors are available. When working, it is recommended that the temperature be kept at -40°C~85°C TA. FLASH is the type of program memory used by it. A total of 30 I/Os are available on this device. Other components that are comparable to it have the base part number DSPIC30F3014. The position of the device is QUAD at terminal. There are a total of 44 terminations in it. There are a number of electrical components in the dsPIC? 30F series, including this one. High efficiency is possible due to the 5V supply voltage. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. A total of 44 pins are used in its construction. Based on the Surface Mount method, it is mounted. This device has a total of 44 pins. It is one of the components included in Digital Signal Processors. In the device, there is a memory capacity of 24kB which may be used to store programs and data. It performs extremely well at a frequency of 20MHz. It appears that there are 3 timers/counters in use. The property of OPERATES AT 2.5 V MINIMUM SUPPLY @ 7.5 MHZ is also possessed by it. A supply voltage (Vsup) above 4.5V is necessary for normal operation. Using oscillator type Internal makes it work.
DSPIC30F3014-20I/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F3014-20I/ML Applications
There are a lot of Microchip Technology DSPIC30F3014-20I/ML Microcontroller applications.
- Tape drives
- Speed meter
- Electromechanical control
- Robotic prosthetic limbs
- Torpedo guidance
- Entertainment products
- Temperature sensing and controlling devices
- Set-top boxes
- Paper shredders
- Computers and laptops-video calling, email, blogging