DS92001TMA/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 142.994995mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Buffer, ReDriver |
| Applications | BLVDS |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 726mW |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | DS92001 |
| Output | LVDS |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Operating Supply Current | 65mA |
| Power Dissipation | 726mW |
| Propagation Delay | 2 ns |
| Supply Current-Max | 75mA |
| Turn On Delay Time | 2 ns |
| Max Output Voltage | 500mV |
| Logic Function | Buffer |
| Input | CML, LVDS, LVPECL |
| Power Consumption | 165W |
| Driver Number of Bits | 1 |
| Max Input Current | 20μA |
| Receiver Number of Bits | 4 |
| Interface Standard | EIA-644-A; TIA-644-A |
| Data Rate (Max) | 400Mbps |
| Supply Voltage1-Nom | 3.3V |
| Out Swing-Min | 0.25 V |
| Delay Time | 1.4ns |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS92001TMA/NOPB Overview
There is a packaging of 8-SOIC (0.154, 3.90mm Width) for convenient transport of the power buffer.Package number Tube is ready for power buffer.Easily adaptable Surface Mount universal mouthpiece.A Buffer, ReDriver is a typical type.The op amp buffer uses a voltage of 3V~3.6V volts for its operation.It facilitates input from CML, LVDS, LVPECL sources.If you want to avoid malfunction, set the operating temperature to -40°C~85°C.It targets applications such as BLVDS and others.You can also try searching with "DS92001" when you need specific pin-to-pin solutions for your special needs.8 terminals are on the op amp buffer.Reflow temperature is 260 at its peak.3.3V voltage enables the splitter to handle a wide range of demanding tasks.From the 8 pins on the Power buffer, we can see the pinout of the Power buffer.In the output, LVDS is used.With 8 pins, it is connected.In addition to the Surface Mount axis, it has a female hole for mounting to PCBs or other boards.A power buffer like the power buffer plays a crucial role in the industry.Voltage 65mA is needed to operate this power buffer.During normal operation, 3.3V operating voltage is required.The repeter uses a 4-Bit receiver.It dissipates a maximum of 726mW watts of power.Interface repeater signal based on 1 elements.
DS92001TMA/NOPB Features
Mainly used in BLVDS.
A standard Line Driver or Receivers.
4-Bit receiver.
DS92001TMA/NOPB Applications
There are a lot of Texas Instruments DS92001TMA/NOPB Signal Buffers, Repeaters, Splitters applications.
- Clock Distribution
- Medical
- Data or Clock Signal Amplification
- Test Equipment
- Industrial PCs
- Network Switches/Routers
- Storage Area Networks
- Laptop Computers (for External Video Cards)
- Loopback
- Network Switches/Routers