DS90LV001TLDX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Buffer, ReDriver |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Applications | LVDS |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 726mW |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | DS90LV001 |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Operating Supply Current | 70mA |
| Nominal Supply Current | 70mA |
| Power Dissipation | 726mW |
| Propagation Delay | 2 ns |
| Turn On Delay Time | 2 ns |
| Differential Output | YES |
| Input | CML, LVDS, LVPECL |
| Power Consumption | 155W |
| Receiver Number of Bits | 1 |
| Interface Standard | EIA-644-A; TIA-644-A |
| Number of Drivers | 1 |
| Data Rate (Max) | 800Mbps |
| Out Swing-Min | 0.25 V |
| Delay Time | 1.4ns |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
DS90LV001TLDX Overview
A convenient transport package is provided in the power buffer of a 8-WFDFN Exposed Pad.It has been packaged into Tape & Reel (TR) packages, so power buffer is ready to be shipped.A universal mounting system for easy adaptation.In terms of types, this is a typical Buffer, ReDriver.For this op amp buffer to function, it requires 3V~3.6V voltage.There is CML, LVDS, LVPECL input facilitation.In order to avoid mal-functioning of the system, it is recommended that the operating temperature is set to -40°C~85°C.There are various applications that can be used with this operational amplifier buffer, including LVDS.In order to find more pin-to-pin solutions that will fit your specific needs, try typing "DS90LV001" in the search box.A 8 terminal can be found on the op amp buffer.Its peak reflow temperature is 235 when it is being reflowed.3.3V voltage enables the splitter to handle a wide range of demanding tasks.The pinout of the power buffer starts from 8 pins it has.In addition, it has 8 pins.A Surface Mount hole is available for mounting it on a PCB or another board.Power buffers like this one play a critical role in the industry.It operates at a voltage of 70mA.The operating supply voltage of 3.3V is required for normal operation.1-Bit receivers are used in this repeter.The splitter dissipates at most 726mW watts.Splitters should be powered by 70mA-volts under normal conditions.There are 1 drivers incorporated within the video signal spliter.
DS90LV001TLDX Features
Mainly used in LVDS.
A standard Line Driver or Receivers.
1-Bit receiver.
DS90LV001TLDX Applications
There are a lot of Texas Instruments DS90LV001TLDX Signal Buffers, Repeaters, Splitters applications.
- Industrial PCs
- Loopback
- Communications Switchers
- Medical
- Protection Switching
- Storage Area Networks
- Test Equipment
- Portable IPC/HMI
- Desktop Computers
- SATA SSDs or HDDs