DS90CP04TLQ/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Type | Crosspoint Switch |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Voltage - Supply | 2.375V~2.625V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | DS90CP04 |
| Output | SEPARATE OUTPUT |
| Pin Count | 32 |
| Operating Supply Voltage | 2.5V |
| Circuit | 1 x 4:4 |
| Supply Voltage-Max (Vsup) | 2.625V |
| Supply Voltage-Min (Vsup) | 2.375V |
| Number of Channels | 4 |
| Interface | LVDS |
| Nominal Supply Current | 220mA |
| Data Rate | 2.5 Gbps |
| Supply Type | Single |
| Supply Current-Max (Isup) | 300mA |
| Power Consumption | 725W |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Switching | BREAK-BEFORE-MAKE |
| Number of Receivers | 4 |
| Height | 800μm |
| Length | 6mm |
| Width | 6mm |
| Thickness | 800μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS90CP04TLQ/NOPB Overview
Due to the fact that it is provided in the 32-WFQFN Exposed Pad, digital switch allows the board to be compacted.The package is packaged in the manner of Tape & Reel (TR).The method digital switch ic adopts for mounting is Surface Mount.The analog IC in the multiplexers is identified as Crosspoint Switch.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.Design engineers have more flexibility when digital controlled switch operates at 2.375V~2.625V voltage.As parts of its basic configuration, 32 terminations are desgined.The base part number is DS90CP04, which can also be used to find its logic switch related parts.For multiplexer's system, a voltage of 2.5V is supplied.Currently, this turn signal switch has a total of 32 component pins.In this case, Single is employed as the supply type.The board is configured with 32 pins.As you can see, it is mounted in the direction of Surface Mount.To avoid unnecessary failures, keep the supply voltage at 2.375V (Vsup).Keeping Vsup at 2.625V will prevent some unnecessary failures.This is an the digital switch ic that is classified as Multiplexer or Switches.The performance of the multiplexers can be reliably maintained at a voltage of 2.5V.The turn signal switch's circuit consists of 4 channels that are being used for transmission in the circuit.
DS90CP04TLQ/NOPB Features
Supplied in the 32-WFQFN Exposed Pad package
Adopting a supply type of Single
Operating with the supply voltage of 2.5V
DS90CP04TLQ/NOPB Applications
There are a lot of Texas Instruments DS90CP04TLQ/NOPB Signal Switches / Multiplexers / Decoders applications.
- Injectors
- Speed synchronization of multiple motors in industries
- Analog, digital or video signal switching
- Decimal decoder
- Enabling different rows of memory depending on address in memory chips
- Textile mills
- Image transmission
- Memory system of computers
- CPU memory location identification
- HDMI applications