DS2502+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) |
| Number of Pins | 3 |
| Weight | 453.59237mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Additional Feature | MICROLAN COMPATIBLE |
| Subcategory | Other Memory ICs |
| Technology | EPROM - OTP |
| Voltage - Supply | 2.8V~6V |
| Terminal Position | BOTTOM |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DS2502 |
| Pin Count | 3 |
| Operating Supply Voltage | 6V |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2.8V |
| Interface | Serial |
| Memory Size | 1Kb 128 x 8 |
| Operating Supply Current | 5μA |
| Memory Type | Non-Volatile |
| Access Time | 15 μs |
| Memory Format | EPROM |
| Memory Interface | 1-Wire® |
| Organization | 128X8 |
| Memory Width | 8 |
| Density | 1 kb |
| I/O Type | COMMON |
| Diameter | 4.95mm |
| Height | 3.94mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS2502+ Overview
In terms of its memory type, it can be classified as Non-Volatile. In addition, memory ics is available in a Bulk case as well. TO-226-3, TO-92-3 (TO-226AA) case encloses it. The memory size of the chip is 1Kb 128 x 8 Mb. As with most mainstream devices, this one uses EPROM-format memory. Due to its extended operating temperature range, the device is well suited for a wide range of demanding applications. There is a voltage range of 2.8V~6V for the supply voltage. The recommended mounting type for memory ics is Through Hole. A total of 3 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. In order to function properly, this ic memory chip should be powered by a voltage of 5V. To select similar parts, many people use the device's base part number DS2502. The memory device is enclosed in a package with an 3-pin connector. This memory device has 3 pins, indicating it has 3 memory locations. This memory runs on an 6V operating supply voltage. Memory chips configured with Through Hole mounting achieve high efficiency and simplicity. Although it has all the merits this chip has, it is also equipped with MICROLAN COMPATIBLE to give a performance boost to the system. A memory mapped I/O port address of COMMON bits is used in this device. There is a common misconception that this component is a type of Other Memory ICs. Ic memory chip is recommended that the device be operated at a supply current of 5μA volts.
DS2502+ Features
Package / Case: TO-226-3, TO-92-3 (TO-226AA)
3 Pins
Operating Supply Voltage:6V
Additional Feature:MICROLAN COMPATIBLE
I/O Type: COMMON
DS2502+ Applications
There are a lot of Maxim Integrated DS2502+ Memory applications.
- networking
- Camcorders
- networks
- printers
- eSRAM
- graphics card
- personal computers
- workstations,
- eDRAM
- Cache memory