DS21S07AS+
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 9 |
| Type | SCSI, LVD, SE |
| Resistance | 110Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Bus Terminators |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DS21S07A |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 5V |
| Number of Channels | 18 |
| Nominal Supply Current | 250mA |
| Differential Output | NO |
| Number of Signal Lines | 9 |
| Pull-up Resistance-Nom | 110Ohm |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS21S07AS+ Overview
A 9 termination consists of terminating transmission lines with a device matching the line's characteristic impedance. A well-known feature of the 16-SOIC (0.295, 7.50mm Width) is its low packaging cost. Materials are taken from Tube's packaging. Mounting it on a PCB is done with Surface Mount. There should not be an increase in Operating Temperature over 0°C~70°C. The material meets SCSI, LVD, SE-qualification for standard applications. There is a 4V~5.5V Supply Voltage provided to ensure normal operation. A Base Part Number DS21S07A can help you find related parts. For specific uses, 16 pins are included. In general, a signal line is defined as a line devoted solely to transmitting signals or intelligence, whether it's for purposes of public or private communication. Optimal efficiency requires a supply voltage of 5V. On it there is a Surface Mount-mount. A subcategory Bus Terminators belongs to it. The 5V Power Supplies are necessary for the operation of the system. Resistance is?a measure of the opposition to current flow in an electrical circuit. ?The resistance of this electrical device is 110Ohm (Ω). To fully perform its functions, 5.5V needs supply current.
DS21S07AS+ Features
9 terminations
Tube package
DS21S07A family
16 pin count
9 signal lines
5V power supplies
DS21S07AS+ Applications
There are a lot of Maxim Integrated DS21S07AS+ Signal Terminators applications.
- Network attached storage (NAS)
- USB hubs
- Data Routers
- CD-ROM drives
- plotters
- Data Networking
- Data Routers
- Programmable logic controller and remote input modules
- Remote input module
- mainframes