DS1706REPA
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | MicroMonitor™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | PUSHBUTTON RESET OPTION |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | DS1706 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 60μA |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 2.63V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 130ms Minimum |
| Min Reset Threshold Voltage | 2.55V |
| Max Reset Threshold Voltage | 2.7V |
| Undervoltage Threshold | 2.55V |
| Overvoltage Threshold | 2.7V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DS1706REPA Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Power management is packaged in a Tube way. Please refer to this PMIC for 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. IC management is packaged as a 8-DIP (0.300, 7.62mm) package. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. IC management conducts at a voltage of 5V. In a 1 supply voltage, the PMIC chip conducts. Through Hole mounts IC management. Power Management Circuits is a subcategory of this PMIC chip. There are a total of 8 pins on power management. 8 pins are on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.2V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Through Hole is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. The supply current of the power management is 60μA. The other features include, for example, [0], which is just one example. A similar IC managements number of the manufacturer can always be found by using DS1706, the base power ics number. To operate this power management, you will need at least 5V volts of power. Voltage supervisor can work with a supply temperature of 60μA at the most. Supervisors from the well-known MicroMonitor? series product line are featured in this PMIC.
DS1706REPA Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
60μA operating supply current
DS1706REPA Applications
There are a lot of Maxim Integrated DS1706REPA Voltage Supervisors applications.
- Automotive power systems
- Smart meter
- Urban rail transit weak current power monitoring
- Computer applications
- Power distribution systems of infant care room
- Linux and server computing
- Leakage protection
- Display equipment
- Sensitive sensors
- Set top box