DS1321S
| Parameters | |
|---|---|
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | DS1321 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 1 |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Adjustable Threshold | NO |
| Supply Current-Max (Isup) | 1.5mA |
| Controller Type | Nonvolatile RAM |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Power Management Circuits |
DS1321S Overview
A package of materials from Tube is included with the product. For the sake of saving board space, it has been placed in the 16-SOIC (0.154, 3.90mm Width). There are several types of Nonvolatile RAM and it is a high-quality and reliable type. Ideally, the operating temperature should be set at -40°C~85°C. The voltage 4.75V~5.5V must be provided for the device to function normally. It is mounted according to the Surface Mount technique. In addition to this part number, more related electronic parts are available according to its base part number DS1321. It is common to use 16 terminations to prevent signals from reflecting off the end of the transmission line. Device supply voltage is 5V. The device has 16 pins configured. As a result, the reflow temperature limit of 245 is determined by the component with the lowest tolerance for high temperatures. This is a type of electronic apart with 16 channels. As a subcategory of Power Management Circuits, it is included in this category. Data transmission is ensured through 1 channels. If the power supply of 5V is provided, high efficiency can be achieved. An analog IC of this type is designated as POWER SUPPLY SUPPORT CIRCUIT. The minimum value of supply voltage should be higher than 4.5V. It is possible to supply as much voltage as 5.5V without causing damage to the internal circuit or degradation in characteristics. It is possible to supply a current of 1.5mA maximum without causing characteristics degradation or damage to the internal circuit.
DS1321S Features
Available in the 16-SOIC (0.154, 3.90mm Width) package
Nonvolatile RAM as controller type
Operating temperature of -40°C~85°C
DS1321S Applications
There are a lot of Maxim Integrated DS1321S Memory Controllers applications.
- Embedded modules including U.2, M.2, MO-297 and MO-300
- Multi-Chip-Modules (MCM)
- SmartCards
- Facsimile, Printers and Photocopiers
- eMMC embedded Flash
- Solid State Disks (SSD)
- Disk-on-Board
- Internet Appliances
- NVSRAM Modules
- Security Flash Drive