DS1314S+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Weight | 665.986997mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | DS1314 |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 30μA |
| Memory Type | SRAM |
| Adjustable Threshold | NO |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 20 ns |
| Supply Current-Max (Isup) | 140mA |
| Controller Type | Nonvolatile RAM |
| Height | 2.35mm |
| Length | 10.1mm |
| Width | 7.4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS1314S+ Overview
Tube has packaged it with its materials. In order to conserve space on the board, it is located in the 16-SOIC (0.295, 7.50mm Width). In this case, it is an extremely reliable and high quality type of Nonvolatile RAM. Ideally, the operating temperature should be set at -40°C~85°C. It is necessary to supply voltage to 3V~3.6V in order to ensure normal operation. The mount is constructed using the Surface Mount technique. In addition, it is possible to find more related electronic parts by using its base part number DS1314. It is common to use 16 terminations to prevent signals from reflecting off the end of the transmission line. Device supply voltage is 3.3V. A 16 pin is configured on the board. Reflow temperature limit 260 is determined by the component with the lowest temperature tolerance. There are 16 channels in this type of electronic apart. As a subcategory of Power Management Circuits, it is included in this category. Data is transmitted through 1 channels. POWER SUPPLY SUPPORT CIRCUIT is the type of analog integrated circuit used in this device. Memory type SRAM is used for storing data. Ideally, the supply voltage should be higher than 3V. It is possible to supply a maximum voltage of 3.6V without affecting the circuit's characteristics or causing any damage. A maximum current of 140mA can be supplied without degrading the characteristics of the circuit or damaging it. In this case, 30μA is drawn from the supply of the device. During operation, the device draws voltage from the supply to produce 3.3V. On the PCB, it is mounted according to Surface Mount.
DS1314S+ Features
Available in the 16-SOIC (0.295, 7.50mm Width) package
Nonvolatile RAM as controller type
Operating temperature of -40°C~85°C
Operating supply current of 30μA
Operating supply voltage of 3.3V
DS1314S+ Applications
There are a lot of Maxim Integrated DS1314S+ Memory Controllers applications.
- Point-of-Sale Systems
- microSD cards for consumer and mobile applications
- Embedded Systems
- Ultra durable Flash Drive
- Multi-Chip-Packages (MCP)
- Microprocessor Systems
- Embedded Flash
- Industrial USB Flash Drive
- PCMCIA or ATA PC cards
- SmartCards