DS1314E+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 190.990737mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DS1314 |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 30μA |
| Memory Type | SRAM |
| Adjustable Threshold | NO |
| Supply Current-Max (Isup) | 140mA |
| Controller Type | Nonvolatile RAM |
| Height Seated (Max) | 1.1mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS1314E+ Overview
Materials from Tube are used in its packaging. This information is provided in the 20-TSSOP (0.173, 4.40mm Width) in order to save space on the board. This is a high quality and reliable type of Nonvolatile RAM. It is recommended that the operating temperature be set at -40°C~85°C. It is necessary to supply voltage to 3V~3.6V in order to ensure normal operation. The mounting technique used is Surface Mount. The base part number DS1314 can be used to find more electronic parts related to this part. It is common to use 20 terminations to prevent signals from reflecting off the end of the transmission line. A voltage of 3.3V is used as the supply voltage for the device. The device has 20 pins configured. As a result, the reflow temperature limit of 260 is determined by the component with the lowest tolerance for high temperatures. A kind of electronic apart with 20 channels is involved. Subcategory Power Management Circuits includes it. In order to ensure that data is transmitted, there are 1 channels. The power supplies of 3.3V enable high efficiency to be achieved. An analog IC of this type is designated as POWER SUPPLY SUPPORT CIRCUIT. The SRAM memory type is used to store information. Ideally, the supply voltage should be higher than 3V. The maximum voltage that can be supplied without causing characteristics degradation or damage to the internal circuit is as high as 3.6V. An internal circuit can be supplied with a maximum current of 140mA without causing any degradation of its characteristics or damage to its integrity. A device draws current from its supply to provide 30μA.
DS1314E+ Features
Available in the 20-TSSOP (0.173, 4.40mm Width) package
Nonvolatile RAM as controller type
Operating temperature of -40°C~85°C
Operating supply current of 30μA
DS1314E+ Applications
There are a lot of Maxim Integrated DS1314E+ Memory Controllers applications.
- CFast cards
- Point-of-Sale Systems
- Facsimile, Printers and Photocopiers
- Security Flash Drive
- Disk-on-Board
- Industrial USB Flash Drive
- eMMC embedded Flash
- Computers
- High reliability & industrial Compact FlashTM Cards (CFC)
- Multi-Chip-Package (MCP)