DS1312S-2+
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | DS1312 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Interface | Parallel |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 50μA |
| Memory Type | RAM |
| Adjustable Threshold | NO |
| Propagation Delay | 10 ns |
| Supply Current-Max (Isup) | 200mA |
| Controller Type | Nonvolatile RAM |
| Height | 1.35mm |
| Length | 4.8mm |
| Width | 3.8mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
DS1312S-2+ Overview
Tube has packaged it with its materials. For the sake of saving board space, it has been placed in the 8-SOIC (0.154, 3.90mm Width). Nonvolatile RAM type with high quality and reliability. A temperature of -40°C~85°C should be set for the operating environment. The voltage 4.75V~5.5V must be provided for the device to function normally. The mounting technique is based on the Surface Mount method. By using its base part number DS1312, you can locate electronic parts that are related to this part. There are 8 terminations used to prevent signals from reflecting off the end of the transmission line. This device is supplied with voltage 5V. It is configured with 8 pins. A component's tolerance for high temperatures determines the reflow temperature limit 260. It is a kind of electronic apart with 8 channels. Listed under the subcategory of Power Management Circuits. There are 1 channels designed to ensure the transmission of data. If the power supply of 5V is provided, high efficiency can be achieved. An analog IC of type POWER SUPPLY SUPPORT CIRCUIT is used in this device. The RAM memory type is used to store information. The maximum current that can be applied without degrading the characteristics or causing damage to the internal circuitry is 200mA. 50μA is drawn from the device's supply by the current it draws. It is the device that draws the voltage of 5V from its supply. On the PCB, it is mounted according to Surface Mount.
DS1312S-2+ Features
Available in the 8-SOIC (0.154, 3.90mm Width) package
Nonvolatile RAM as controller type
Operating temperature of -40°C~85°C
Operating supply current of 50μA
Operating supply voltage of 5V
DS1312S-2+ Applications
There are a lot of Maxim Integrated DS1312S-2+ Memory Controllers applications.
- System-in-Package (SiP) embedded flash drives (eSSD)
- Multi-Chip-Packages (MCP)
- Microprocessor Systems
- Industrial USB Flash Drive
- Solid State Disks (SSD)
- Multi-Chip-Modules (MCM)
- eMMC embedded Flash
- SecureDigitial- SD Cards for industrial and consumer applications
- Point-of-Sale Systems
- eUSB, embedded USB module